STAPLING MACHINE 6 USES CT6000

CENTER

MANUAL for CT-6000 BENCH CRIMPER

EASY ADJUSTMENT PROCEDURE

THIS TOOL IS ORIGINALLY SET AT THE FACTORY.

AFTER MANY USES, FOLLOW THE INSTRUCTIONS, IF THIS TOOL REQUIRES ADJUSTMENT. (OR IF YOU NEED YOUR OWN SPECIAL

LEVER ACTION AND PRELOAD SETTING.)

1. LOOSEN THE "UPPER ADJUSTMENT NUT" BY TURNING COUNTERCLOCKWISE.

2. LOOSEN THE "UPPER ADJUSTMENT BOLT" BY TURNING COUNTERCLOCKWISE.

3. ALSO LOOSEN THE "LOWER BOLT" BY TURNING ANTI-CLOCKWISE.

4. AND THEN ADJUST THE "TOP SET BOLT", AS YOU WANT YOUR PRELOAD

POWER ACTION AND USE AT ITS OPTIMAL LEVEL.

-

FOR EXAMPLE,

TIGHTEN THE "UPPER ADJUSTMENT BOLT" BY TURNING CLOCKWISE;

REDUCED JAW CLEARANCE / RAISED HANDLE / INCREASED PRELOAD POWER.

LOOSENING THE "UPPER ADJUSTMENT BOLT" BY TURNING ANTI-CLOCKWISE;

WIDEN JAW CLEARANCE/LOWER HANDLE/DECREASE PRELOAD POWER.

5. TIGHTEN THE "BOTTOM SCREW" BY TURNING CLOCKWISE.

6. FINALLY, FIX THE TOOL, TO TIGHTEN THE "UPPER FIXING NUT" TURNING CLOCKWISE.

7. CHECK AGAIN